Chào bạn Anonymous. Sign Up Free!
Trang chủ Sản phẩm Giỏ hàng Tải về Hỗ trợ Trang cá nhân
Danh mục
 · Trang chủ
 · Linh kiện điện tử
 · Tìm kiếm tin tức
 · Thống kê truy cập
 · Giỏ hàng của bạn
 · Đặt hàng linh kiện
 · Trang cá nhân
Các nhóm linh kiện
 · Phần tử cơ bản
 · Linh kiện bán dẫn
 · Mạch tích hợp LSI,MSI
 · Vi điều khiển các loại
 · Vi mạch logic khả trình
 · Bộ nhớ ROM,RAM
 · CPLD,FPGA,FPAA,ASICS
 · Chuyển đổi ADC,DAC
 · ICs truyền nhận dữ liệu
 · Cảm biến đo lường
 · Các bộ điều khiển CN
 · KIT phát triển các loại
 · ICs nguồn và ICs công suất
 · ICs tương tự và ICs hiếm
 · Phụ kiện điện - điện tử
Địa chỉ: nhà 7B ngõ 126 Hoàng Hoa Thám,           ĐT: (04) 22421882-22421883.
Thụy Khuê, Tây Hồ, Hà Nội.                                    Email: sales@ic-vn.com; phuclamjsc@gmail.com
Thời gian làm việc: 8h-17h30 hàng ngày, nghỉ CN và các ngày lễ.

Chi tiết của: PIC18F4550-I/PT TQFP

Xem toàn ảnh
Tên hàngPIC18F4550-I/PT TQFP
Đơn giá80,000 VND
Giá giảm80,000 VND (số lượng lớn hơn 100)
Số lượng8
Hãng sản xuấtMICROCHIP
Nguồn tài liệuTài liệu về [PIC18F4550-I/PT TQFP]
Số lần mua3
  [ Quay lại ]   


Đặc tả:

18F4550-44 Pin High-Performance, Enhanced Flash USB
Microcontrollers with nanoWatt Technology

Universal Serial Bus Features:
• USB V2.0 Compliant
• Low Speed (1.5 Mb/s) and Full Speed (12 Mb/s)
• Supports Control, Interrupt, Isochronous and Bulk Transfers
• Supports up to 32 endpoints (16 bidirectional)
• 1-Kbyte dual access RAM for USB
• On-chip USB transceiver with on-chip voltage regulator
• Interface for off-chip USB transceiver
• Streaming Parallel Port (SPP) for USB streaming transfers (40/44-pin devices only)
Power-Managed Modes:
• Run: CPU on, peripherals on
• Idle: CPU off, peripherals on
• Sleep: CPU off, peripherals off
• Idle mode currents down to 5.8 µA typical
• Sleep mode currents down to 0.1 µA typical
• Timer1 oscillator: 1.1 µA typical, 32 kHz, 2V
• Watchdog Timer: 2.1 µA typical
• Two-Speed Oscillator Start-upVFlexible Oscillator Structure:
• Four Crystal modes including High Precision PLL for USB
• Two External Clock modes, up to 48 MHz
• Internal oscillator block:
- 8 user-selectable frequencies, from 31kHz to 8MHz
- User-tunable to compensate for frequency drift
• Secondary oscillator using Timer1 # 32 kHz
• Dual oscillator options allow microcontroller and USB module to run at different clock speeds
• Fail-Safe Clock Monitor
- Allows for safe shutdown if any clock stops
Peripheral Highlights:
• High-current sink/source 25 mA/25 mA
• Three external interrupts
• Four Timer modules (Timer0 to Timer3)
• Up to 2 Capture/Compare/PWM (CCP) modules:
- Capture is 16-bit, max. resolution 6.25ns (TCY/16)
- Compare is 16-bit, max. resolution 100ns (TCY)
- PWM output: PWM resolution is 1 to 10-bit
• Enhanced Capture/Compare/PWM (ECCP) module:
- Multiple output modes
- Selectable polarity
- Programmable dead time
- Auto-Shutdown and Auto-Restart
• Enhanced USART module:
- LIN bus support
• Master Synchronous Serial Port (MSSP) module
supporting 3-wire SPI™ (all 4 modes) and I2C™ Master and Slave modes
• 10-bit, up to 13-channels Analog-to-Digital Converter module (A/D) with programmable acquisition time
• Dual analog comparators with input multiplexing
Special Microcontroller Features:
• C compiler optimized architecture with optional extended instruction set
• 100,000 erase/write cycle Enhanced Flash program memory typical
• 1,000,000 erase/write cycle Data EEPROM memory typical
• Flash/Data EEPROM Retention: > 40 years
• Self-programmable under software control
• Priority levels for interrupts
• 8 x 8 Single-Cycle Hardware Multiplier
• Extended Watchdog Timer (WDT):
- Programmable period from 41ms to 131s
• Programmable Code Protection
• Single-Supply 5V In-Circuit Serial Programming™ (ICSP™) via two pins
• In-Circuit Debug (ICD) via two pins
• Optional dedicated ICD/ICSP port (44-pin devices only)
• Wide operating voltage range (2.0V to 5.5V)
Tìm kiếm

Tên linh kiện
Tìm trong nhóm
  Tìm kiếm 
Đăng nhập
Tên truy nhập

Mật khẩu


Quy trình Mua Hàng

  1. Đăng kí/Đăng nhập vào trang để thực hiện quá trình mua hàng.
  2. Truy cập vào mục linh kiện bạn cần.
  3. Nhặt linh kiện vào giỏ hàng.
  4. Tiếp tục lặp lại bước trên với các linh kiện khác.
  5. Vào giỏ hàng để điều chỉnh số lượng của các mục hàng đã chọn.
  6. Gửi yêu cầu đặt hàng.
  7. Với các loại linh kiện chúng tôi không có, mời bạn vào  mục "Đặt hàng linh kiện" để gửi yêu cầu đặt hàng cho chúng tôi. Trên yêu cầu đặt hàng , bạn ghi rõ thông tin loại LK, kiếu chân LK, Số lượng cần mua, địa chỉ và số ĐT để liên  hệ. Chúng tôi chỉ nhận đặt hàng với  giá trị nhỏ nhất là 500,000 VNĐ cho mỗi loại LK.
 
Designed & Developped by CuongQuay™  
Powered by PHP-Nuke
Copyright © 2006 by The Gioi Linh Kien Dien Tu
This site is developped by CuongQuay base on PHPNuke 6.0
Founded by: CuongQuay - 0915651001, CuongBeo - 0913074814